Cat 926
Wheel loader
- Have a seat in the new Cat small wheel loader and enjoy automatic temperature control, class leading sound levels, enhanced all-around visibility and low-effort joystick controls that move with you on a fully adjustable seat suspension. A large spacious operator environment combined with Caterpillar hydraulic cylinder damping and smooth predictable controls make this the most comfortable seat on your jobsite.
- An upgrade to multi-view camera and rear object detection gives you an extra eye on the jobsite while the new optional force feedback joystick steering keeps you feeling confident on those long shifts. The operator not present function helps to isolate the machine if you leave the environment; while seat belt notifications give you a gentle reminder to buckle up.
Efficiently Powerful
- Experience the difference with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed working in combination with a new auto engine RPM mode. This provides efficiency as standard with a boost in power when you need it. Optimize traction and minimize wheel slip with a new Auto Wheel Torque system tuned to provide peak performance while maximizing tire life and keeping operating costs low. Track your production and accurately hit your load targets with Cat Payload. 250 hours of Cat Payload demonstration will be included as standard with an optional subscription for extended use.
Work Made Easy
- Move more with the Caterpillar patented quick loading performance series buckets and optimized Z-bar linkage with enhanced forward visibility that combines the digging efficiency of a traditional Z-bar with tool carrier capabilities. The parallel lift and high tilt forces throughout the working range allow you to confidently handle loads with precise control.
- Multi-function work has never been easier with dedicated pumps for each system and a flow sharing implement valve governed by an intelligent power management system. Simultaneously lift, steer, and drive without compromise. Upgrade to autolube and tire pressure monitoring to make service easy and get to work quicker. Light the way with auto roading lights that come on at night fall.
Customize Your Experience
- Meet your application requirements and individual preferences with Caterpillar industry first Hystat™ Operator Modes featuring four unique power train settings. Select classic torque converter for smooth rollout, conventional hystat for aggressive engine braking, an ice mode that maximizes your control on slippery underfoot, and an all new singlepedal mode for simplified use.
- Fine tune machine performance with adjustments at your fingertips through programmable joysticks, soft touch buttons, and a new jog dial that works in combination with a standard touch screen display. Quickly recall attachment profiles that maintain key settings for versatility on the jobsite and optimal efficiency.
Upgrades and Services
- Enjoy a full range of upgrades and accessories to configure your small wheel loader for a broader range of applications.
- Utilize readily available services and maintenance parts, including a range of self-service options (SSO) and dealer installed kits.
Purpose Built: Handlers Arrangements - Aggregate Handler
- Increased Payload: Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.
- Long Life Sand and Gravel Buckets: Performance series buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. Buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.
- Protect your Power Train: Increase your fording depth with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond cleanout without contamination.
Purpose Built: Handlers Arrangements - Waste Handler
- Guard Your Investment: Choose from a complete range of optional guarding to protect your machine from the harsh environment of a waste handling application. Machine guarding is purpose built to protect the machine’s major components.
- Breathe Clean: Maximize your engine life and extend filter cleaning intervals with a turbine pre-cleaner. Keep cool with a reversing fan to purge the single plane, widely spaced core cooling package and brush-less sealed alternator. Breathe clean with a powered pre-cleaner for the operator environment.
- Maximize Tire Life: Fine tune your wheel torque to match the underfoot conditions and maximize performance while extending tire life. Standard auto wheel torque is ideal for waste handling applications.
Sustainability
- The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.
- Engine Idle Management System (EIMS) helps maximize fuel efficiency and reduce greenhouse gas emissions while maintaining machine performance.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
- Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
- Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Power on Demand, transparent to the operator, provides full-time efficiency and power when you need it.
- Tire Pressure Monitoring provides real-time tire pressure information to the operator to help increase tire wear and achieve better fuel efficiency and reduced greenhouse gas emissions.
- Intelligent Hystat Transmission helps improves control and reduces fuel consumption and greenhouse gas emissions in load and carry applications.
- Variable Displacement Pumps match power to load as application requirements change.
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons). |
|---|
Axles
| Front | Fixed; Locking differential (standard) |
|---|---|
| Rear | Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional) |
Buckets
| Bucket Capacities | 1.9-5.0 m3 (2.5-6.5 yd3) |
|---|
Cab
| ROPS | ISO 3471:2008 |
|---|---|
| FOPS | ISO 3449:2005 LEVEL II |
Dimensions with Bucket - High Lift
| Height - Ground to Cab** | 3340 mm |
|---|---|
| Height - Ground to Beacon** | 3707 mm |
| Height - Ground to Axle Center** | 685 mm |
| Height - Ground Clearance** | 397 mm |
| Length - Overall* | 8065 mm |
| Length - Rear Axle to Bumper | 1958 mm |
| Length - Hitch to Front Axle | 1500 mm |
| Length - Wheel Base | 3000 mm |
| Clearance - Bucket at 45°* | 3378 mm |
| Clearance - Load over Height** | 3550 mm |
| Clearance - Level Bucket** | 4073 mm |
| Height - Bucket Pin** | 4400 mm |
| Height - Overall** | 5569 mm |
| Reach - Bucket at 45°* | 1261 mm |
| Carry Height - Bucket Pin | 582 mm |
| Dig Depth** | 135 mm |
| Width - Bucket | 2550 mm |
| Width - Tread Center | 1930 mm |
| Turning Radius - Over Bucket | 6226 mm |
| Width - Over Tires | 2540 mm |
| Turning Radius - Outside of Tires | 5402 mm |
| Turning Radius - Inside of Tires | 2851 mm |
| Rack Angle at Full Lift | 51 ° |
| Dump Angle at Full Lift | 49 ° |
| Rack Angle at Carry | 47 ° |
| Departure Angle | 33 ° |
| Articulation Angle | 40 ° |
| Operating Weight | 13049 kg |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with 1.9 m³ (2.5 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires. |
Dimensions with Bucket - Standard Lift
| Height - Ground to Cab** | 3340 mm |
|---|---|
| Height - Ground to Beacon** | 3707 mm |
| Height - Ground to Axle Center** | 685 mm |
| Height - Ground Clearance** | 397 mm |
| Length - Overall* | 7388 mm |
| Length - Rear Axle to Bumper | 1958 mm |
| Length - Hitch to Front Axle | 1500 mm |
| Length - Wheel Base | 3000 mm |
| Clearance - Bucket at 45°* | 2881 mm |
| Clearance - Load over Height** | 3351 mm |
| Clearance - Level Bucket** | 3576 mm |
| Height - Bucket Pin** | 3903 mm |
| Height - Overall** | 5072 mm |
| Reach - Bucket at 45°* | 928 mm |
| Carry Height - Bucket Pin | 382 mm |
| Dig Depth** | 100 mm |
| Width - Bucket | 2550 mm |
| Width - Tread Center | 1930 mm |
| Turning Radius - Over Bucket | 5903 mm |
| Width - Over Tires | 2540 mm |
| Turning Radius - Outside of Tires | 5402 mm |
| Turning Radius - Inside of Tires | 2851 mm |
| Rack Angle at Full Lift | 53 ° |
| Dump Angle at Full Lift | 50 ° |
| Rack Angle at Carry | 41 ° |
| Departure Angle | 33 ° |
| Articulation Angle | 40 ° |
| Operating Weight | 12688 kg |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with 1.9 m³ (2.5 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires. |
Engine
| Rated Gross Power - SAE J1995 | 127 kW |
|---|---|
| Engine Model | Cat C7.1* |
| Performance Mode | Automatic |
| Rated Gross Power - Rated Engine Speed | 1800 r/min |
| Rated Gross Power - SAE J1995 (DIN) | 172 mhp |
| Rated Engine Power - ISO 14396 | 125 kW |
| Rated Engine Power - ISO 14396 (DIN) | 170 mhp |
| Rated Net Power - SAE J1349 at Minimum Fan Speed | 123 kW |
| Rated Net Power - ISO 9249 at Minimum Fan Speed | 123 kW |
| Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed | 167 mhp |
| Maximum Gross Torque - Engine Speed | 1400 r/min |
| Maximum Gross Torque - SAE J1995 | 824 N·m |
| Maximum Gross Torque - ISO 14396 | 815 N·m |
| Maximum Net Torque - SAE J1349 | 804 N·m |
| Maximum Net Torque - ISO 9249 | 807 N·m |
| Displacement | 7.01 l |
| Bore | 105 mm |
| Stroke | 135 mm |
| Note | *Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards. |
| Note (1) | Advertised power is tested per the specified standard in effect at the time of manufacture |
| Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
Loader Hydraulic System
| Maximum Flow - Implement Pump | 150 l/min |
|---|---|
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 150 l/min |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 150 l/min |
| Maximum Working Pressure - Implement Pump | 26000 kPa |
| Relief Pressure - Tilt Cylinder | 28000 kPa |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 26000 kPa |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 28000 kPa |
| Lift Cylinder: Standard Lift Linkage - Bore Diameter | 110 mm |
| Lift Cylinder: Standard Lift Linkage - Rod Diameter | 60 mm |
| Lift Cylinder: Standard Lift Linkage - Stroke | 728 mm |
| Tilt Cylinder: Standard Lift Linkage - Bore Diameter | 140 mm |
| Tilt Cylinder: Standard Lift Linkage - Rod Diameter | 75 mm |
| Tilt Cylinder: Standard Lift Linkage - Stroke | 516 mm |
| Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift | 5.5 s |
| Hydraulic Cycle Time - Dump (at Maximum Lift Height) | 1.5 s |
| Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level | 2.6 s |
| Hydraulic Cycle Time - Total Cycle Time | 9.6 s |
| Note | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
Service Refill Capacities
| Fuel Tank | 195 l |
|---|---|
| Cooling System | 30 l |
| Engine Crankcase | 20 l |
| Transmission - Gear Box | 8.5 l |
| Front Axles | 26 l |
| Rear Axles | 25 l |
| Hydraulic System - Including Tank | 160 l |
| Hydraulic Tank | 90 l |
| Diesel Exhaust Fluid (DEF) Tank | 19 l |
| Note | DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019. |
Sound
| Operator Sound Pressure (ISO 6396:2008) | 68 dB(A) |
|---|---|
| Average Exterior Sound Pressure (ISO 6395:2008) | 101 dB(A) |
| Note (1) | European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701. |
Steering
| Steering Cylinder - Bore Diameter | 70 mm |
|---|---|
| Steering Cylinder - Rod Diameter | 40 mm |
| Steering Cylinder - Stroke | 438 mm |
| Maximum Flow - Steering Pump | 130 l/min |
| Maximum Working Pressure - Steering Pump | 24130 kPa |
| Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited | 2.8 s |
| Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed | 2.4 s |
Sustainability
| Recyclability | 95% |
|---|
Tires
| Standard Size | 20.5 R25, radial (L-3) |
|---|---|
| Other Choices Include | 20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
Transmission
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
|---|---|
| Forward and Reverse - Range 2 | 13 km/h |
| Forward and Reverse - Range 3 | 27 km/h |
| Forward and Reverse - Range 4 | 40 km/h |
| Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). |
Weights
| Operating Weight | 12688 kg |
|---|---|
| Operating Weight - High Lift | 13049 kg |
